How to integrate Driver fatigue monitor to our GPS tracker or MDVR?
1. our device
Our driver status monitor system has 2 kinds of output:
1). I/O output
it is only a high/low voltage output, you can get only the alarm signal,the connection is easy.
the LS-803 or DSM02 output wire always have 3.3V under normal status, but when it’s triggered, this wire will have 0 V only, so the GPS tracker input will get this signal, (same way as SOS botton), and take it as an fatigue alarm, show it on the software. It’s an easy way, no protocol to integrate.
2). RS232 output,
RS232 output has alarm signal and picture output, thus you can get the driver’s face picture in the center, it need to integrate to the GPS system via protocol.
2. your device
If you only need I/O, then just cut a SOS button, connect our LS-803 or DSM02, change the SOS alarm to driver fatigue alarm, easy.
If you need RS232, your GPS device or MDVR need RS232 input.
3. integrated devices.
Anyway, we have MDVR system integrated already, all algorithm are combined together, so the cost is lower than your buy GPS tracker and DSM separately, It’s worth a try.
If you are looking for reliable OEM Driver fatigue monitor system manufacturer, please feel free to email [email protected], we will offer professional & customized fleet management solution at reasonable price.
